Please contact us if you need further assistance or have any questions.
Suzhou Crown Electronic Technology
Supply Professional Wire Processing Equipment
This is a fully automatic cable double-end terminal crimping and connector housing inserting machine. It is able to process cable cutting, stripping, and both ends terminal crimping and housing connector insertion.
○ Full servo motor control, high precision
○ The plastic housing can be inserted in staggered positions.
○ Produce products with different wire lengths
○ Full computer touch screen control, convenient and quick debugging
○ Detection device: wire absence detection, terminal absence detection, crimping force detection CFM, terminal size detection (visual CCD), plastic housing pullback detection
○ Arbitrary cutting length (within the stroke range)
Contact us: firstname.lastname@example.org
Operation video of the wire terminal crimping and housing connector inserting machine
Both ends terminal crimping & connector housing inserting, and the length of the wire can be unequal;
Optional 90-degree flip plastic housing inserting, staggered positions housing inserting, jump pin plastic housing inserting;
It can have one housing at one end and multiple housing connectors at the other end (the same type of housing connector, different number of pins); double-layer plastic housing shells can be inserted;
The plastic housing shells at both ends can be on the same side, on the front and back sides.
AWG#32-AWG#30 about 1300 holes/hour (wire length within 100MM)
AWG#28-AWG#20 about 1600 holes/hour (wire length within 100MM)
|Cutting length||standard 35MM-500MM (special requirements need to be customized: shortest 80MM, longest 450MM )|
|Cutting accuracy||cutting length is less than 100MM, deviation is less than 0.3MM (cutting length x0.002); cutting length is greater than 100MM, deviation is less than 0.3MM+ (cutting length x0.002).|
|Stripping length||front end: 1.0-6.0MM (half stripping length 2.0-6.0MM), rear end: 1.0-8.0MM (half stripping length 2.0-8.0MM)|
|Applicable applicator||horizontal feed applicator|
|Crimping machine||2.0T crimping machine|
|Control mode||10-inch touch screen, intelligent PLC control|
|Detection device||wire absence detection, terminal absence detection, crimping force detection CFM, terminal size detection (visual CCD), plastic housing pullback detection|
|Power supply||single phase: AC210V-AC230V 20/60HZ 10A|
|Compressed air||0.6-0.8MPa (need to use clean and dry air source)|