Please contact us if you need further assistance or have any questions.
Suzhou Crown Electronic Technology
Supply Professional Wire Processing Equipment
Tel
+86-512-57750238
info@kscrown.com
The dual column floor standing tensile testing machine is designed to test a wide range of materials, including, but not limited to: plastics, films, paper, packaging materials, filter material, adhesives, foils, food, toys, medical devices and components, in tension, compression, flexure, shear, and peel.
Model:
|
|
○ Multiple data can be printed, and graphic output comparison can be made according to different data, with high control precision and easy operation. Modular design is adopted, and various accessories are complete in variety and flexible in collocation.
○ This machine is mainly suitable for testing the mechanical properties of metals such as tension, compression, and bending. It can also perform constant stress, constant strain, creep, relaxation, axial, and radial tests. Parameters such as tensile strength, yield strength, elongation, constant elongation stress, constant stress elongation, elastic modulus and other parameters can be automatically calculated according to GB, JIS, ASTM, DIN and other standards.
○ Available test data: maximum strength, minimum strength, breaking value, upper and lower yield strength, tensile strength, compressive strength, elastic modulus, elongation, maximum, minimum, and average values of the peeling interval, etc. (Customers need to select before ordering) It has multiple protections such as overload, overcurrent, overvoltage, undervoltage, overspeed, and stroke.
Model |
WL-SZ101 |
|
Capacity selection |
500KG/5000N |
|
Test accuracy |
0.5 level , the accuracy of the test force indication is better than ±0.5%, |
|
Load sensing |
High-precision tension and pressure sensors , (multiple sensors can be installed at the same time - optional) |
|
High resolution |
1/ 10 0000 |
|
Magnification |
24-bit AD non-segment amplification |
|
Unit selection |
N, kN |
|
Test speed range
|
Servo type: 0.05~500 mm/min stepless speed regulation |
|
Non-servo type 100~500 mm/min or 10~100 mm/min or 50~300mm/min stepless speed regulation |
||
When the speed is greater than 50 mm/min, the applied force should not be less than 25% of the maximum test force (GB/T 16491-1996) |
||
Speed control accuracy |
±1% (Class 1) |
|
Speed control accuracy |
±0.2% (Class 0.5) |
|
Test effective width |
Standard type: 40 0 mm (or customized according to customer requirements) |
|
Test stroke ( including fixture) |
Standard type: 800 mm (or customized according to customer requirements) |
|
Overload setting protection function |
When it exceeds 10% of the set test force, the system automatically shuts down for protection |
|
Stroke setting protection function |
Travel upper and lower limit position setting protection, |
|
Power |
AC Servo Motor & Servo Drive Controller |
|
Power consumption |
0.75 kVA; 20 kN |
|
Power supply |
1ø, 220 VAC, 50/60 Hz |
|
Measurement system |
hardware specification |
Provided computer hardware specifications to buy original Lenovo or HP brand machines, or customers bring their own |
special software |
Refer to the software version of the computer measurement system |
|
Volume |
the host |
80x70x 180 cm ( WxDxH ) |
Weight |
the host |
300kg |
console |
100kg |