Product Category

Multi-conductor Cable Stripping and Crimping Machine

Multi-conductor Cable Stripping and Crimping Machine

The multi-core cable stripping and ferrules crimping machine is especially designed for processing the core wires of multi-conductor sheathed cables. The outside jacket should be pre-stripped before using this machine.

Model:

WL-DX228/WL-68210C

Inquire

Share this:

Description
Technical Data

The multi-core cable stripping and crimping machine can complete wire feeding, wire organizing, inner core stripping, terminal crimping accurately and continuously.
The machine is equipped with an automatic waste collection device, an automatic leather suction device and a rubber material collection box to ensure the cleanliness of the work site.
The machine is equipped with an automatic cutting device to ensure that the waste belt is cut every 100mm and automatically enters the waste collection box.
The machine is equipped with an automatic wire-taking device to avoid terminal jam.

Model	WL-DX228/WL-68210C
Power supply	AC220V/50HZ
Production capacity(8pin)	5,600 terminals/hour
Applicable wire range	AWG22-AWG28 (2P-12P)
Suitable wire diameter	AWG#16-AWG#30
Wire processing length	100-9999.99mm
Outer length range	above 33mm
Air pressure	0.5Mpa
Stripping accuracy	±0.1mm
Dimensions	790mm670mm1,365mm (LWH)
Weight	about 200KG