The wire sequence inspecting device adopts vision technology and intelligent algorithms to determine compliance with preset standards, automatically identify the color of the harness, so as to make sure the wiring sequence is 100% correct.
(1) Automatically identify the color of each wire of the harness and systematically determine whether the position is correct.
(2) Automatically judge whether the wire terminal hole is inserted incorrectly or in place
(3) Automatically display the wire position of the bad line sequence, and give an audible alarm prompt NG
Automatically triggers after the material is stable, no need for foot switch or other IO input trigger
The detection accuracy is high, and even if characters are printed on the surface of the wire, the system can eliminate the interference of characters and accurately distinguish the color line sequence. Detection time <0.2s/pcs
You can place the harness to be tested in the inspection frame at will, without strict placement restrictions.
FM-9A can support I/O output, with small size and light weight
Integrated embedded device, low power consumption (<35W), anti-virus
Easy to use, easy to replace the material under test
|Detection accuracy||High precision|
|House connector width||Max.50mm|
|Row of house connector|
|Wire placement requirements||Arbitrarily placed|
|Support output||FM-9A supports I/O output|
|Features||Small size and light weight|
Identify wire color, determine correct position, determine if wire terminal
inserted in place, detect poor wire harness and alarm NG