This machine is suitable for wearing heat shrinlable sleeves onto AC, DC cables and other electronic wire ends, as well as cable terminals.
This machine can automatically cut heat shrinkable tubing into required length.
The operator inserts the wire end into the guide hole, stepping on the foot switch, and the device will heat shrink the tubing automatically.
The shrinkable tubing length, specifications, and heat shrink temperature can be adjusted by changing settings and replacing corresponding accessories.
|Applicable sleeves length||5~25mm (Longer ones need to be customized by assessing the feasibility, but it is not recommended to use sleeve lengths with a difference of more than 5mm on the same machine)|
|Applicable sleeves OD||Ф 1.0~Ф 5.5mm (larger ones need to be customized by evaluating feasibility)|
|Production efficiency||700~1,200 PCS/H (depending on the sleeve size and quantity)|
|Yield rate||99% (under the premise of correct operation by personnel)|
|Weight||about 200 kg|
|Power supply||AC220V 50HZ|
|Air pressure||0.5-0.6Mpa (compressed air must be dry, sufficient and oil-free. Otherwise it will affect the performance of the equipment).|