The automatic wire feeder machine delivers the wire feeding results you need for maximizing automated wire harness processing productivity and quality. Its maximum feeding speed is 50 m/min, and the maximum processing wire diameter is 25mm.
This fully automatic wire feeder eliminates the trouble of manual wire feeding. It is suitable for various wires and cables.
Main body material: welded with high quality national standard rectangular tube, the structure is firm and the appearance is beautiful
Maximum feeding speed is 50 m/min, and maximum wire diameter is 25mm
Coil size: 300-1500mm diameter (customer needs to provide specific coil size)
Wire clamp: adaptive active wheel, maximum width 680mm
Maximum coil weight: 1.5T
|Main body material||high quality national standard rectangular tube|
|Take off power|
0.75kw domestic brand geared motor with vector inverter, inverter control line speed, maximum line speed 50m/min, maximum wire diameter 25mm
|Cable lift||Manual handling of the reel|
300-1500mm diameter (customer needs to provide specific coil size)
|Coil clamping||Adaptive drive wheel with a maximum width of 680mm|
|Max coil weight||1.5T|
The tension wheel is divided into the upper fixed wheel set (3 pcs) and the lower moving wheel
set (3 pcs), and the tension wheel diameter is 140mm.
When the computer wire stripper works, the tension wheel moves accordingly,
and the potentiometer rotates through the sprocket, and the potentiometer feeds back
the signal to the inverter to control the speed of the pay-off motor, thereby controlling the speed
of the line to be synchronized with the computer stripping machine.
Increase or decrease the weight on the chain to adjust the tension of the cable