Suzhou Crown Electronic Technology

Supply Professional Wire Processing Equipment

Tel

+86-512-5775-0238
Share to:

Shrinking Tubing Heating Oven

WL6617-1 is a heat shrinkable tube heating device designed for mass production and can work continuously for 24 hours. The heating block of the machine is uniform and does not hurt the wire. It can realize single-end heating and intermediate heating, and adjust the heating range according to the length of the heat-shrinkable tube. The speed of the conveyor can be kept uniform by manually adjusting the speed.

The vertical distance and parallel direction of the heating port to the conveyor belt are adjustable, which is suitable for heat shrinkable tube heating of different size parts. It is suitable for users who have high precision requirements for wire harness heating, and is also suitable for heating high temperature resistant Teflon heat shrinkable tubes.

  • WL6617-1

  • Single side heating

    Suitable for processing heating shrinkable tubing on thin wires. Not suitable for heating large diameter wire harnesses. The diameter of the heated product needs to be <15mm and the length of the heated product needs to be <660mm.


  • Heating position can be adjusted, accurate heating without hurting the wire

    The vertical distance and parallel distance from the heating port to the conveyor belt can be adjusted, which is suitable for heating heat-shrinkable tubes of different sizes.


  • Thermal insulation properties

      Double-layer insulation, sturdy casing, safe and reliable, can maintain high temperature work for a long time.


  • Digital display

    Digital menu, easy to operate, display temperature in real time


  • Temperature control system (room temperature-200 °C)

    The digital stepless mediation method is used to control the power output and the temperature. The output is stable, and the temperature control accuracy is ±2 °C.


  • Security

    It is equipped with overheating overload protection and power-off protection device. It does not generate exhaust gas and is environmentally friendly. It can work 24 hours continuously.


  • Optional auxiliary conveyor

    This machine is equipped with an auxiliary conveyor, which can be used for heating wire harness of different sizes.

Model

WL6617-1

Size

Auxiliary conveyorL×W×H

1250*770*260mm

Harness diameter

<15mm

Maximum heating sleeve length

<660mm

Heating zone

300mm

Cooling zone

200mm

Maximum conveying width

600mm

Maximum conveying height

<90mm

Conveyor Belt

Material

Teflon

Speed

1-5m/min

Conveying motor power

25W (stepless speed regulation)

Heating

Heating method

radiation

Heating tube power

1800W

Power

Power supply

220V, two-phase three-wire, 50HZ

Machine power

2KW 

Please contact us if you need further assistance or have any questions.

Follow Us

Contact Us

Tel:  0086-512-5775-0238
Email: info@kscrown.com

Suzhou Crown Electronic Technology

Supply Professional Wire Processing Equipment

Home

© 2020    Suzhou Crown Electronic Technology Co., Ltd.  All rights reserved.
Site Map  

Leave us a Message
Please contact us if you need further assistance or have any questions.