Suzhou Crown Electronic Technology
Supply Professional Wire Processing Equipment
Tel
+86-512-5775-0238
info@kscrown.com
This is a three-outlet heat-shrinkable tube heating air gun. It features high thermal efficiency, durable and accurate temperature control, which is suitable for heat-shrinkable tube heating and shrinking. It can work continuously for 24 hours without interruption. It is especially suitable for installing on assembly line.The three outlets are suitable for heating large diameter heat shrinkable tube and heat shrinkable film.
Model:
|
|
Power regulation
Solid state relay is used to control power output and temperature, and output is stable.
Heat insulation
Double layer heat preservation.The strong machine casing makes it safe and reliable,can maintain long-term high temperature work.
Digital display temperature regulation three outlet uniform temperature control
Each outlet is equipped with a temperature sensor, which can adjust the temperature according to needs, and the three ports are unified temperature control.
High heat exchange efficiency
Ingenious design of wind tunnel let the air uniform through the inside and outside of the helical heating wire.Heat exchange near 100%,the loss of wind pressure is less.
Term ordering detection function
This machine control system is equipped with motor item ordering sequence detection function.If the item ordering error,the item ordering warning indicator lights up.
Remote open control
This machine has a remote control interface, which can control the start and stop of the machine remotely.
Fan delay function
In order to protect the heating core and prolong the service life of the heating core, the machine has a time delay function of downtime and blow drying. After the machine stops working, the hair dryer will blow off for a minute before it can be shut down.
Air flow regulating valve
The air inlet of the blower is equipped with a manual air volume regulating valve, and the air volume can be adjusted according to the needs.
Security
It has overheating overload protection, power cut protection device, emergency stop switch, phase sequence protection, fully guarantee the safety of the equipment, do not produce exhaust gas, and meet the environmental protection.This machine can operate continuously for 24 hours all around the year.
Model | WL600F-253 | |
Size | Overall machine size | 680×460×460mm |
The size of the air outlet | The diameter is 50mm or 25mm, can be selected according to the needs | |
Outlet number | 3 | |
Heat preservation layer | Material | Double insulation |
Heater | Name | Electric hot wire |
Heater power | 3*2KW, a total of 6KW | |
Heating wire life | 100,000hours | |
Temperature control | Temperature control | Solid state relay |
Temperature control meter | Digital control | |
Control accuracy | ±2℃ | |
Maximum temperature | <395℃ | |
Blower | Power | 200w |
Maximum air volume | 280M3/H, the actual air volume is about 138M3/H | |
static pressure | 380pa | |
Power supply | Power demand | 380V, 50HZ |
Overall machine power | 6,300W | |
Weight | Overall machine weight | 26KG |