Please contact us if you need further assistance or have any questions.
Suzhou Crown Electronic Technology
Supply Professional Wire Processing Equipment
Tel
+86-512-5775-0238
info@kscrown.com
This is a fully automatic wire cutting stripping and five ends four wires combined terminal crimping machine. It can process 4 wires at the same time, one side crimping 4 wires into one terminal, and the other side crimping terminals for each wire.
Model: WL-N04
Features
Function: wire cutting, striping, 4 wires 5 ends terminal crimping
Available wire sizes: AWG18#-AWG28#
Min. wire length: 60mm
The new fourth-generation four-wheel wire feed system is equipped with a precise servo motor as the power drive, and the Omron encoder as a length feedback compensation, which makes the wire feeding accuracy reach a higher level. Tailored for extra long cables, the length tolerance is controlled to within 2% of the total length.
Convenient wire change method, only need to replace different wire feeders to use different types of wire
The new wire feeding mechanism cooperates with the stripping mechanism to accurately strip the wire, not to damage the rubber and inner core wire.
Contact us: info@kscrown.com
Technical Data
Model | WL-N04 |
Applicable mold | OTP Horizontal Mold, Vertical Mold |
Function | Wire cutting, striping, 4 wires 5 ends terminal crimping |
Applicable terminals | Joint terminal |
Available wire size | AWG18#-28# |
Min. wire length | 60mm |
Wire cutting tolerance | within 0.2% of total length |
Stripping length | min 10mm~max 30mm |
Working efficiency | 3200pcs/H |
Rated power | 3000W |
Working pressure | 0.4~0.6MPa |
Power supply | AC 220V 50HZ |
Net. weight | 420kg |
Dimension | 1.5m*0.8m*1.6m |